After my starter took a dump last month, I installed an Autolite starter built for an Eagle Premier, and it works beautifully. Much smaller, easier to install, and it makes a way cooler sound when it's cranking :) Best part, it only cost me $120. Whilst I was still trying to make the old starter work, one of the times that I was cranking it, I suddenly heard a very rapid *CLICK CLICK CLICK CLICK* coming from underneath the dash, and just at that moment my #5 fuse blew. Since replacing the starter, my #5 fuse keeps blowing every time I turn the key to the ON position, and my idle speed motor no longer vibrates. Could these things be related? I notice that there's a LUCAS relay under the dash, could this be the problem? I have yet to check the voltage at the idle speed motor plug. Interestingly, if I turn the key to the ON position, then replace the #5 fuse, my dash instruments will work fine, but if I turn the key off, and then back on, the fuse will then blow. thanks, Matt #1604 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/