Re: [DML] Re: Exhaust Manifold Gaskets (Enid/Jeremiah)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: Exhaust Manifold Gaskets (Enid/Jeremiah)



Excellent.  Thank you Bill for the very useful
information.  I will probably make an order to Rob in
regards to the studs.  I'm taking a good 3 weeks on
this job (weekends), so I'll make sure I take my sweet
time doing this.  Thanks again.  Oh and about the
microswitch, hehe, I'm still leanring =P.


--- content22207 <brobertson@xxxxxxxxxxxx> wrote:

> Be careful removing exhaust manifold nuts. Studs are
> small and fine
> thread pitch. Nuts are usually well rusted to them.
> Does not take much
> torque to snap a stud off in the heads.
> 
[moderator snip]



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated