See recent Messages #44435 and #44447. Bill Robertson #5939 >--- In dmcnews@xxxxxxxxxxxxxxx, "eremhcel" <dmcfive0@xxxx> wrote: > On Monady night, I was running my car and thought I could smooth out > the idle a little by playing with the mixture screw. I turned the > screw a little both ways and while doing that the engine would shake > and want to die. I turned the screw back and it recovered from dying, > then when I tried to smooth it out, it started shaking again then > died before I could turn the screw back. Now the car won't start. I > tried a few times later on because it seemed like the engine was > getting flooded. I tried to start it after sitting over night and a > few other times and it will start for a second then stall out. I have > the battery on a charger because I could see the volts going low from > cranking the engine, so after the battery is charged up I'll try > starting it again. Does it sound like it's not starting because the > battery was low, or because I turned the mixture screw too much? It > always started before I played around with the mixture screw. Any > help, suggestions greatly appreciated! > Thanks in advance, > Mike > 5623 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/