Re: [DML] Turn Signals not working.

[John Podlewski <john_podlewski@xxxxxxxxx>]

Check the black plastic plug back behind the coil, I believe the one of the turn signals' is a green/red wire(lower right on the plug).  Also be sure to check wiring for the car (i.e use a tester) and retrace from the plug back then you can isolate the problem.  You can check the connection, that was my problem!  If it  lights up on dash but actual turn signal is not lit then that may be something to look at.
Hope it helps?

austinbrumley <austinbrumley@xxxxxxxxxxxx> wrote:
A few days ago i posted a msg abou this problem, someone on the list 
told me to check my hazard light swith. It turns out the swith had a 
wire come out of it so i reconected it and the swith now lights up 
and for a few minutes my flashers worked, but my turn signal never 
did. now the flashers stoped working but the switch still lights up? 
Any ideas are greatly appreciated.



Austin.



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/