[DML] Front shock
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Front shock





       Hello List

          I have some question about the front shocks.
I am thinking to get a front set of coil over shock, but 
The mono tube shock I found has 2"body diam.

          I measured the lower link(Part#105177)  and a shock hole was 
about 53mm(This is not sure) for my lower link. 
Is anyone correct size of the hole? Is mono tube shock excessive?
Can I cut little bit the side of hole if the hole is tight? 
Can I use 2" body diam shocks without any modify. Any experience?

         Any advice and suggestion I will be appreciate your kindness.

Blacknight  

 




[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated