[DML] Re: Frame+Epoxy
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Frame+Epoxy



Instead of the aluminum colored paint you could use Krylon "Smoke
Grey" in a spray can. It is in Home Depot and I am sure many other
stores. It is about as close a match as you will find. Just sand and
feather the edges and you will never notice the repair.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "austinbrumley" <austinbrumley@xxxx>
wrote:
> I have a quick question. When i bought my car off of Ebay it showed 
> up with chipping epoxy on the rear brace under the engine. I had to 
> pull the motor from the car anyway so i decided to fix that while the 
> motor was out. Here's what i did, I took a prpane torch & heated the 
> affected epoxy and scraped it off. After that i sanded it to clean 
> bare metal then painted it with a rust preventing primer. After that 
> i put on a coat of aluminum colered engine paint. It looks great do 
> you think it is a sufficent fix for now?




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated