[DML] Re: Heatgun + Frame = Bye Bye Epoxy
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Heatgun + Frame = Bye Bye Epoxy



I think to remove all of the epoxy on the frame with a heatgun and 
scraper would be suicide.  I'm only removing it where I have rust, 
and then I'm applying POR-15 silver over top of it.

Matt
#1604

--- In dmcnews@xxxxxxxxxxxxxxx, PRC1216@xxxx wrote:
> Just out of curiosity Matt, what are you going to do once all of 
the epoxy is 
> removed?  Sandblast and powdercoat?  Word of advice, I have seen 
what the 
> sandblasting of a frame does to a DeLorean, and the sand gets 
everywhere.  On one 
> car the interior was perfect before hand, and when it returned it 
looked like 
> 60 years of dust had accumulated in it and it had to be cleaned 
all over 
> again.  But the frame did look great.   Just my advice.
> 
> Patrick
> 1880
> 
> 
> [Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated