RE: [DML] brakes

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Andy,
If your pedal is all the way to the floor and the reservoir is full then I
would think the master cylinder is bad.
If your holding pedal and no fluid is coming out as you apply pressure then
the line or caliper is stopped. You might try taking the line loose and
blowing air thru it. It's going to be a messy job.
John Hervey
www.specialtauto.com


-----Original Message-----
From: andy [mailto:andydandy777@xxxxxxx]
Sent: Monday, July 05, 2004 7:27 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] brakes


I tried to bleed my brakes per the instructions, problem is this I
get no fluid out of the right rear lines(only one I have tried). I
have a pedal that is all the way on the floor no brakes at all. I
have my better half hold the pedal down while i opened the valve but
no fluid in fact did this quite a few times but still no fluid. I
removed the plug just in case it was stopped up still no fluid. 



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/