RE: [DML] Efi

[jwit6@xxxxxx]

The SDS ECU I'm using is working fine. Over 12,000 miles so far. If I did it again I would use a different ECU. The SDS unit I used works great, but the proramming on the SDS does not use a PC, rather it uses it's own controller/programmer. Very convenient, and you can do almost anything you want to with it, including monitor all the engine sensors real time. Its called gauge mode and you can see TPS values, temps, rpm, duty cycle etc. The down side is that it cannot record those same values so you can't really fine tune it as easily as some other units. I'd consider the MegaSquirt kits from a cost perspective if I were to do this again.

Jim 
6147


nicholden@xxxxxxxxx wrote:

>Hi, I was reading an old post by Jim Witherspoon regarding his Efi 
>conversion. I am almost ready to undertake a simular conversion 
>while i have my body off and can climb around the engine easily. 
>Just wondering Jim if you would do anything differently now or is 
>the system still working fine? Also did you post any pics of this? 
>
>Thanks NIck 10927



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/