In a message dated 6/22/04 7:18:32 PM Central Daylight Time, swingle@xxxxxxxxxxx writes: > > Drill them and tap them to 5/16". Just be careful to not drill into > the steering column. The original size is about 8 mm and the normal > puller kits don't have it. I made some long 8 mm screws and they > stripped out anyway. After tapping them out to something a little > meatier it went fine. > > I was going to follow Dave's advice but I figured i would try the 8MM screws first (if it stripped, i would have to drill anyway). i believe they are actually called 6M when you buy them at the store. they probably won't strip if you are sure to screw them in all of the way first (or as far as they will go). make sure you get nice long ones or you might run out of room. good luck, Andy [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/