Hi all, been a while since I've posted....a lot has happened and to make it short, I'm a new dad! Anyway, I was wiring up a new fuse box yesterday in my D and I noticed something odd. Position 13 (Automatoc Tranny fuse) had wires to it along with a 10 amp fuse. What's so odd? I have a manual tranny! Is this still used in the manual tranny setup? Also...position 18 (Stop lights) has a 20 amp fuse BUT....there are no wires going to it?? What gives? I know I have the orientation of the fuse box correct since the cover of the fuse box only goes on one way and I matched everything up. I removed one wire at a time from the old box, snipped off the old connector, crimped and soldered on a new connector and snapped it into the same exact spot on the new fuse box. Any insight would be appreciative. Thanks, Steve To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/