I have located a low PSI electric pump, 2" in diameter. Will bush it out to 2 3/8" with a piece of industrial fuel hose and use it in the stock boot, most likely attached to the original electrical circuit. Will cap the return grommet with a short piece of SS rod. Am going to run a new line to the rear of the car and leave the original plumbing intact in case I later swap back to my Renault block (will cap the ends to keep trash out). This is the easiest solution, especially so close to Pigeon Forge. Bill Robertson #5939 To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/