[DML] Re: Hard/No Cold Start
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Hard/No Cold Start



I would check if the cold start valve getting power when cold and the
engine is cranking. You might also have a large vacuum leak. Is the
plug in the housing over the mixture screw?
David Teitelbaum
vin 10757


-- In dmcnews@xxxxxxxxxxxxxxx, "Jason Rowe" <rowejj@xxxx> wrote:
>     Hello all,
>                I would really like to get my car out for the season
but I have a small 
> problem. I can't get my car to start. It will crank and crank over
but doesn't want
> to start. I tried spraying a little starting fluid in and it started
and ran fine up until
> I turned it off. I tried to start it again today and it just cranks
and cranks again.





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated