Re: [DML] Alignment results..

["Tom" <tomcio@xxxxxxxxxxx>]

Hi Adam

The problem that you are having is caused by the rear toe. Front setting is
ussually based on the rear. So, without the rear set, you shouldn't really
measure the front.
If you don't trust this shop to do the work, why did you go there at all?
Find a place that you can trust and have them set the rear and then front.
Only the toe is adjustable. The pulling and wandering will go away if the
alligment is done properly.
For the caster on the front you might want to check the sway bar bushings
(before you do the alligment). If they are over 22 years old its time to
replace them. They are responsible for the front caster.
Other readings are good, so don't worry about them.
I had Sears to it on my two DeLoreans and they did it right three times. I
just don't trust them with driving my D. I pull in and onto the lift. I told
them that noone drives my D but me. They said no problem :)

Good luck
Tom Niemczewski
tomcio@xxxxxxxxxxx
VIN 6149
Save the dream so you can live the dream...



----- Original Message ----- 
From: "Adam 16683" <acprice1@xxxxxxxxxxx>


> My car was just measured for alignment at my local les shwab. The
> results arent too bad but still bother me a little.
>
> Front (all in degrees):
>
> Left camber: -0.1           Right camber: -0.3
> Left caster: 4.3            Right caster: 2.6
> Left toe   : .20            Right toe   : .20
>
> Rear (degrees):
>
> Left Camber: -1.2           Right camber: -1.0
> Left toe   : 0.42           Right toe   : -0.07
>




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/