Harold, Thank you for that measurement. Mine is 26 and 3/8 inches from the edge of the red plastic handle that seats on the fill tube to the tip of the "wire". There are no marking on my stick and it is made out of a coiled metal material like the outside metal sheath of a release cable of some sort. The coils of the stick make it more difficult to see the level of the oil and the oil quickly dissipates into the groves of the coil making a reading even more difficult. Is yours a standard flat metal strip? If we are measuring from the same reference point then mine must be too short. What do you think? Dave & 6530 Message: 19 Date: Sun, 25 Apr 2004 13:38:02 -0000 From: "Harold McElraft" <hmcelraft@xxxxxxx> Subject: Re: Auto Tranny Dip Stick This will be a great exercise. I have often thought the auto dip stick was probably not accurate. Mine is 26 3/4 inches from the red plastic handle to the full-hot line. I use that line as the full-cold line. Years ago when I believed the full hot line the trans would sometimes slip when cold and show air bubbles in the fluid. Harold McElraft - 3354 [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/