Re: [DML] DMCH on/off switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] DMCH on/off switch



You can use the switch.  If you have an ohm meter handy you can 
figure out which contacts to use.  Put the switch into one 
position and look for a pair of contacts that are shorted.  Then
flip the switch and see if they open.  That would be the pair to 
use for your application.  Be sure to put an inline fuse in the
circuit to keep your flux capacitor from burning your car to the 
ground.

--
Mike

> I have a question for anyone who has bought these from DMCH.  The 
> on/off switches have 3 prongs on it.  I was going to use this as an 
> in-line on/off switch for my installed flux capacitor that I bought. 
> Can I use this switch with only 2 wires?  If so, which prongs would be 
> the ones to use?  I assume one is a ground but I would not need it as 
> the unit will be grounded to the battery.
> 
> This would be the same situation with the other switch as it will be 
> used as a manual over-ride for my automatic antenna.  My radio doesn't 
> lower the antenna when listening to CD's so I have a switch hidden under 
> the drivers knee pad.  This is a auto parts store 2 prong switch.  I want to 
> replace it 
> with the DMC switch so I don't have to fumble around looking for it.
> 
> Yes, I did ask DMCH, Warren wasn't sure which prongs were which so I
> figured I'd ask any of our resident experts out there.
> 
> Thanks
> 
> Tom
> #05732
> 
> 
> 
> 
> 
> 
> 
> To address comments privately to the moderating team, please address:
> moderators@xxxxxxxxxxx
> 
> For more info on the list, tech articles, cars for sale see www.dmcnews.com
> 
> To search the archives or view files, log in at 
> http://groups.yahoo.com/group/dmcnews 
> Yahoo! Groups Links
> 
> 
> 
>  
> 



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated