[DML] Re: BROKEN TORSION BAR
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: BROKEN TORSION BAR



--- In dmcnews@xxxxxxxxxxxxxxx, "Pietrowski" <kritter@xxxx> wrote:
> Hi everybody,
> 
> The torsion bar on my passenger side door snapped in half.  I have 
a replacement for it, but when I installed it, there is no support 
to hold the door up.  Can anybody help me out?  Wh at is the proper 
way to install it?  Thanks.
> 
> John Pietrowski
> Toledo OH VIN#4945
> 
Hello John, I use a 1/2 drive hex key and a long 1/2 inch breaker 
bar with a jack handle to hold the bar in place while you attach the 
mount plate. When I was with Delorean we held the door up with a 2x4 
cut to length. Be very careful as it is easy to break a rear window 
or strip the nutserts for the mounting plate out of the abs. Good 
luck.




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated