RE: [DML] fascia repair
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] fascia repair



I don't know if you can remove them once they are there.... but I guess.
I went down to Home Depot and bought a 3 foot long, 2" wide peice of 
aluminum
and cut it in half. Then I drilled a few holes in it and roughed it up so 
the epoxy would stick
better. I used the most powerfull epoxy I could find and glued them in place 
and used a few
clamps to hold it down.
Make sure to put some rags or something soft on the clamps so you don't scar 
the paint.
I let it dry and now it is stiff.
I have not time tested this, so I will see how it works.

However, you can buy a kit from John Hervey at
http://www.specialtauto.com
that will do the same thing.
- Videobob



>From: Eric Itzel <eric@xxxxxxxxxxxxx>
>Reply-To: dmcnews@xxxxxxxxxxxxxxx
>To: dmcnews@xxxxxxxxxxxxxxx, DMCForum@xxxxxxxxxxxxxxx
>Subject: [DML] fascia repair
>Date: Wed, 24 Mar 2004 11:24:53 -0500
>
>Hi everyone
>
>I have most of my front end disassembled right now to get a dent
>repaired in one of my fenders, so I thought it would be a good time to
>straighten and repaint my fascia. Does anyone have any procedures or
>tips on how to go in and removed the eyebrows from the front fascia?
>
>Thanks
>
>Eric Itzel
>vin 4433
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>To address comments privately to the moderating team, please address:
>moderators@xxxxxxxxxxx
>
>For more info on the list, tech articles, cars for sale see www.dmcnews.com
>
>To search the archives or view files, log in at 
>http://groups.yahoo.com/group/dmcnews
>Yahoo! Groups Links
>
>
>
>
>

_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar ? get it now! 
http://toolbar.msn.com/go/onm00200415ave/direct/01/




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated