NO NO NO - rather than cutting the vinyl of those expensive side panels, simply pull the large door weatherstripping off, heat the vinyl with a good hair dryer, and gently unwrap the vinyl from the body. To reinstall it, glue it back in with 3M spray trim adhesive (the same stuff you use on the headliner). Heating it when you go to reinstall it helps too. This is much neater when finished and avoids cutting the vinyl. Dave S --- In dmcnews@xxxxxxxxxxxxxxx, Louie G <louie@xxxx> wrote: >----- If I remember right we just had to remove two screws to loosen the trim panel, and remove the large bolt that holds on the seatbelt mount. Then you have to remove the inner door seal, and a lip is exposed where the trim panel is glued onto the underbody. Cut through the vinyl on the lip around the door with a razor or utility knife, To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/