[DML] Rust question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Rust question



I am doing a major front end replacement and I'm putting sheet metal
plates over the areas where I welded in order to stregnthen. My
question is-should I zinc primer the underside of the plates in order
to prevent small time rust/surface rust? After everythings finished I
plan on spraying POR-15 over the whole frame so it will hopefully seal
the plate welds and outside and no moisture will likely get in. If I
do this will it be necessary to spray anything on the underside of the
plates? Maybe something more then the zinc primer? To me if its sealed
then it shouldn't even get surface rust...right?-I'm under the
impression that rust is caused by moist air, water, etc and if I can
prevent this by sealing then it will be safe from rust. I will upload
pictures of this project soon. Any suggestions are appreciated. Thanks
for your past and future responses - Dan Benedek #05003




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated