[DML] Re: Toby TAB torque specifications

[tobyp@xxxxxxxxxxxx]

Dom - In the installation instructions that came with the bolt kits, 
I recommended a final torque of 50 ft-lbs.  This can be applied to 
either the head side, or the nut side of the joint.  The bolt shank 
should be coated with a good anti-seize compound to protect the inner 
diameter of the steel sleeves in the bushing and trailing arm from 
chafing and corrosion.  I hope this helps!

Toby Peterson  VIN 2248  "Winged1"
DeLorean Parts Northwest, LLC
www.delorean-parts.com

--- In dmcnews@xxxxxxxxxxxxxxx, "Dom Diaz" <dom_diaz@xxxx> wrote:
> What should the Toby TABs be torqued to? (Yes, I know, under load) 
Any info 
> would be appreciated. Thank you.
> 
> Dom




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/