[DML] cluth release bearing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] cluth release bearing



I purchased a new cluth release bearing from a DeLorean supplier and when 
comparing it to the old one they are not the same. The old one strongly 
clips to the yoke while the new one has a tang on one side that sort of 
clips and the other side is straight. The center hole guide is a plastic 
type material on the old one and the new one is all metal.
My concerns are it does not seem to be attached as well to the yoke as the 
old original one and the metal against metal is less desirable for the cener 
hole .

Has anyone else seen this and should this be of concern?
I actually considered using the old carrier for the the new bearing but it 
has one of the ears broken off which is probably why it was making an 
undesirable noise.


Cecil Longwisch
#10663



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated