John, It does sound like the cable is sticking or the acceleration mechanism. Also, I have recently found that the micro switch lever is so strong to push down that it also may be keeping the throttle body lever from going to the rest position. A weak return spring could also be contributing to the problem. Make sure the micro switch screw is about 30 thousands turned in after the bottom screw hits the rest plate. John Hervey www.specialtauto.com -----Original Message----- From: john podlewski [mailto:flyboy_6876@xxxxxxxxx] Sent: Monday, March 08, 2004 9:53 PM To: dmcnews@xxxxxxxxxxxxxxx Subject: [DML] Sticking Idle My D idles fine around 900 RPM's but as soon as I give it gas and allow it to come back to idle sometimes, not all the time it will remain @ 1500 RPM. The problem is fixed with a quick burst of GAS. I put this post up a few weeks ago and I got back, something might be binding. However, everything seems okay except my accel. cable does seems to be stretched. Could that be the cause? Any suggestions would greatly help because I'm going to really get into to it this week. To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/