[DML] Re: windshield washer pump motor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: windshield washer pump motor



Speaking of which...

I have a nasty situation where some of those bolts holding the 
cowling have come loose.  I turn them and turn them -- they just spin 
happily forver, and they don't come out.

Is there a good way to get these bolts out?  Is it possible to get to 
them from the other side without taking the entire car apart?  And if 
so, is there a good way to replace them so that they don't do this 
again?

Also, does anyone know of a good place to get a good WS washer pump?  
Last one I bought didn't even last through a single winter.  And it 
was actually replaced (and installed) by one of the main DMC 
vendors...

Aaron
#1506


--- In dmcnews@xxxxxxxxxxxxxxx, Martin Gutkowski <webmaster@xxxx> 
wrote:
> It should screw in....
> 
> The pain in the backside is usually all the bolts holding the 
cowling 
> around the bottle, not the pump.
> 
> Martin
> 





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated