Re: [DML] Front Fascia
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Front Fascia



Hi Dom,

We'll be publishing an article of the process in our next issue of DCS 
Magazine, along with pictures.  This issue comes out in April.

In the meantime...carefully prying the fascia off from the sides with a 
long flat screwdriver will allow them to stretch far enough, to get the 
mounting studs past the holes...if you don't have the nylock nuts off 
yet though, that's a different story.  I'll let Ken or one of the other 
experts chime in if that's your situation.

Take care,
Josh


Dom Diaz wrote:

>Any recommendations on a GOOD set of instructions for removing the front 
>fascia?? I have the workshop manual, but it says nothing about how you're 
>supposed to bend the sides far enough forward to get to the bolts loose (I 
>also looked on DMC-News but that was more about reinforcing them) Any 
>tips/tricks would be greatly appreciated.
>
>Jordan, I think this is a good how-to topic....



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated