The fact that it broke like it did may indicate its rusted in place. I would plug the hole a bit to keep stuff from getting in.then soak the threads if you can with WD40 for a while. They do make an easy out that will fit that size hole but you may have to go to a specialty tool store to get one or find one on line. IF it doesn't you can have the hole resized close to the thread dimensions. Sometimes the easy out then will work better since the thread is not as stiff and has some give. This happened on one I had a few months ago and I was able to just put in an oversized flat screwdriver and get a bite on it and it came right out after a few days of soaking. I got lucky. This is not a hard thing for an auto repair shop to do so the best suggestion is take it there and let them take it out. Burtons by me charges $30 a bolt and although I have few bolts that give me problems when there is one that is in an odd place or not worth the effort of screwing up I take it there. That would be my suggestion since a good easy out of that size will cost you more in time and materials than taking it somewhere. This is a totally solvable problem so just don't panic and get help. If you are near a DMC center take it there. Ken [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/