[DML] Digest Number 1444
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Digest Number 1444



Title: [DML] Digest Number 1444

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
------------------------------------------------------------------------

There are 25 messages in this issue.

Topics in this digest:

      1. Re: Clock and A/C light dimming.
           From: "content22207" <brobertson@xxxxxxxxxxxx>
      2. Re: Clock and A/C light dimming.
           From: jaimie Mackenzie <jmacberg@xxxxxxxxx>
      3. Re: Re: My "New to Me"  Delorean.
           From: jaimie Mackenzie <jmacberg@xxxxxxxxx>
      4. Re: Leather Interior
           From: "William Bowie" <wbowie@xxxxxxxxx>
      5. Was Re: My "New to Me"  Delorean. Now Locking Module
           From: "David Teitelbaum" <jtrealty@xxxxxxxxxxx>
      6. Power Steering
           From: "vegascop1" <vegascop1@xxxxxxxx>
      7. Re: Clock and A/C light dimming.
           From: "Harold McElraft" <hmcelraft@xxxxxxx>
      8. Re: Restored Engine Compartment
           From: "Harold McElraft" <hmcelraft@xxxxxxx>
      9. Re: Restored Engine Compartment
           From: Dick Ryan <deloreanbiker@xxxxxxxxx>
     10. Re: Aftermarket car stereos
           From: "patrickdmc" <patrickdmc@xxxxxxxxx>
     11. DeLorean Floatation Device
           From: "Darin Wolf" <son_darin@xxxxxxxxxxx>
     12. AW: Clock and A/C light dimming.
           From: "Elvis Nocita" <elvisnocita@xxxxxx>
     13. Re: Power Steering
           From: Warren Turkal <wturkal@xxxxxxx>
     14. Re: Leather Interior
           From: Martin Gutkowski <webmaster@xxxxxxxxxxxxxx>
     15. Re: Leather Interior
           From: Martin Gutkowski <webmaster@xxxxxxxxxxxxxx>
     16. Re: DeLorean Floatation Device
           From: "therealdmcvegas" <DMCVegas@xxxxxxxx>
     17. Re: DeLorean Floatation Device
           From: mike.griese@xxxxxxxxxxxxxxxx
     18. Re: Power Steering
           From: jaimie Mackenzie <jmacberg@xxxxxxxxx>
     19. Cylinder Liner Seat Corrosion
           From: "miltdanfoss" <dan.foss@xxxxxxxxx>
     20. Wiring gremlins
           From: Phil Priestley <phil@xxxxxxxxxxxxxxxxxx>
     21. Re: Leather Interior
           From: mpaine@xxxxxxxxxxxxxxxx
     22. Re: Restored Engine Compartment
           From: "silverdelorean2002" <silvercrw646@xxxxxx>
     23. Re: DeLorean Floatation Device
           From: "David Teitelbaum" <jtrealty@xxxxxxxxxxx>
     24. Re: Exhaust stud removal
           From: "schab932000" <schab932000@xxxxxxxxx>
     25. For Sale -- LockZilla Remote
           From: kayoong@xxxxxxx


________________________________________________________________________
________________________________________________________________________

Message: 1
   Date: Mon, 31 Mar 2003 02:58:08 -0000
   From: "content22207" <brobertson@xxxxxxxxxxxx>
Subject: Re: Clock and A/C light dimming.

In factory configuration A/C lights on own circuit, keyed to ignition,
not headlight switch. Illuminated whenever car is energized. Faux pas
IMHO. Don't know how many amps the bulbs draw, so you might want to
measure before attaching to rheostat. Remember: red/orange line into
rheostat only 16 gauge.

I've rewired my entire headlight circuit, including keying A/C lights
to  dash switch. Schematic in #5939's photo album (still current
except 1A fuse AFTER dash switch has been removed -- getting crowded
under shift boot). Note: other than red/brown line moved from A/C
panel relay, circuit is now 14 gauge until it gets back to fuse block.

Re: clock -- mine's always/only been 12 hour so I can't help you there
(is it OEM?). Was annoyed by dimming with headlights, so I cut that
line when rewiring circuit. Display is hard enough to see as it is
(bad angle).

Bill Robertson
#5939



________________________________________________________________________
________________________________________________________________________

Message: 2
   Date: Sun, 30 Mar 2003 19:07:05 -0800 (PST)
   From: jaimie Mackenzie <jmacberg@xxxxxxxxx>
Subject: Re: Clock and A/C light dimming.

The military time could be for a engilsh or european
model however if the clock is not functioning
correctly it will span time extremely fast and stop at
intervals appearing to be military as well this is
because the set button is broken and the clockis
spanning time because the button is not stopping the
settings the clock continues to move at a rapid fast
pace. the only dimming switch for the instructment
cluster is next to the clock on the left hand side
consult your owners mannuel and please give us achence
to answer all your questions thanks



________________________________________________________________________
________________________________________________________________________

Message: 3
   Date: Sun, 30 Mar 2003 19:01:21 -0800 (PST)
   From: jaimie Mackenzie <jmacberg@xxxxxxxxx>
Subject: Re: Re: My "New to Me"  Delorean.

Also david im having a problem trying to figure out
why the door locks are not operating the coneection to
the modules are fully intact around the fuse box and
checked all fuses. there is a missing square i think
is a relay the square that has the connector holes
that the relay plugs into is absolutely blue and is
located on the far left of the board that had like
five lined relays in a row that then come close to
abutting the fuse box. My question is the pale blue
square that has the little holes is that for the power
door locks?? therefore if the answer is yes i presume
all i need is the relay with the prong teeth correct??
by the way it looks like the driver door was off at
one point.


--- jaimie Mackenzie <jmacberg@xxxxxxxxx> wrote:
> David why do you want to disconnect the locking
> module
> i presume that is for the door locks?
>
>
>
> --- David Teitelbaum <jtrealty@xxxxxxxxxxx> wrote:
> > Check to see that the lambda circuit is operating



________________________________________________________________________
________________________________________________________________________

Message: 4
   Date: Sun, 30 Mar 2003 22:09:49 -0500
   From: "William Bowie" <wbowie@xxxxxxxxx>
Subject: Re: Leather Interior

Aren't there plenty of shops in th US that could handle this?  D seats
aren't anymore difficult to recover than any other car. Why spend so much
shipping them to the UK?

WB(future D owner in training)

----- Original Message -----
From: "Michael Paine" <mpaine@xxxxxxxxxxxxxxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Sunday, March 30, 2003 9:43 PM
Subject: Re: [DML] Leather Interior


> I am in the US and would be interested in getting in touch with them to
> do my seats... wonder what shipping would be for 2 seats to them ??
>
> Michael
>
> Vin 6067 (in under a week)



________________________________________________________________________
________________________________________________________________________

Message: 5
   Date: Mon, 31 Mar 2003 03:19:44 -0000
   From: "David Teitelbaum" <jtrealty@xxxxxxxxxxx>
Subject: Was Re: My "New to Me"  Delorean. Now Locking Module

The locking module will fail locking you in the car, killing the
battery and burning up the solenoids in the doors. Until you can
upgrade either by getting a Lockzilla or reworking the module it is
safer to disconnect it.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, jaimie Mackenzie <jmacberg@xxxx> wrote:
> David why do you want to disconnect the locking module
> i presume that is for the door locks?
>
>
>
> --- David Teitelbaum <jtrealty@xxxx> wrote:
> > Check to see that the lambda circuit is operating ...
>
> <snip -- excessive quoted material removed>
>
> > ... the fuses. Save up for at least a Fanzilla and
> > disconnect the locking
> > module.
> >  You are on your way to the TOTAL enjoyment of a
> > Delorean.
> > David Teitelbaum
> > vin 10757
> >
> >




________________________________________________________________________
________________________________________________________________________

Message: 6
   Date: Mon, 31 Mar 2003 07:29:19 -0000
   From: "vegascop1" <vegascop1@xxxxxxxx>
Subject: Power Steering

Hi guys,

Here is a question for you all. Has anyone ever attempted to update
the rack to a power steering? My concerns are the lenght of the
lines that have to go from the power steering pump(rear) to the
front. Has anyone seen it done? Not nececcerly in a Delorean, maybe
in another vehicle? Any info would be greatly appriciated.

Thnx,
Ski 4649




________________________________________________________________________
________________________________________________________________________

Message: 7
   Date: Mon, 31 Mar 2003 14:22:50 -0000
   From: "Harold McElraft" <hmcelraft@xxxxxxx>
Subject: Re: Clock and A/C light dimming.

Tom
The clock thing is a first for me. I am assuming you have
disconnected the battery for a while to get it to reset with no
luck? If that failed I would get it repaired. Since the light output
is ok the rest is rather low tech stuff by today's standards and can
be fixed rather easily I would think.

As for the lights - What you want to do is pretty easy. But, let me
suggest that you will not like it. The light output does not balance
very well. What I have been most happy with is just eliminating the
AC bezel light completely during the day. The panel now just
illuminates when I turn on the lights. This way the lighting comes
on using the internal resistance (the red module #9). It works great.

You can make this happen by merely disconnecting or cutting the LGW
wire between the AC panel illumination relay (11) and the resistor
(the red one #9) in the relay compartment.

Harold McElraft - 3354




________________________________________________________________________
________________________________________________________________________

Message: 8
   Date: Mon, 31 Mar 2003 14:32:08 -0000
   From: "Harold McElraft" <hmcelraft@xxxxxxx>
Subject: Re: Restored Engine Compartment

Jon

NICE JOB!

Harold McElraft - 3354


-- In dmcnews@xxxxxxxxxxxxxxx, "silverdelorean2002"
<silvercrw646@xxxx> wrote:
> My engine compartment is finally near completion after a ton of
> work. FOr pics please go to the photos section and look under the
> engine folder. Click full size to view the real size. Every part
and
> every bolt has been gone over including polishing.
>
>
> Jon
> 10103




________________________________________________________________________
________________________________________________________________________

Message: 9
   Date: Mon, 31 Mar 2003 06:47:50 -0800 (PST)
   From: Dick Ryan <deloreanbiker@xxxxxxxxx>
Subject: Re: Restored Engine Compartment

Stunning!  Can you post a picture of what you started
with? 

Dick Ryan
VIN16867


__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com



________________________________________________________________________
________________________________________________________________________

Message: 10
   Date: Mon, 31 Mar 2003 14:58:24 -0000
   From: "patrickdmc" <patrickdmc@xxxxxxxxx>
Subject: Re: Aftermarket car stereos

 I've just finished putting in a Sony CD. It was a real job. I went
with Kenwood 6" round speakers in the back and 3 1/2 in the front.
I'm very
happy with it. The speakers are completely hidden and look stock. For
mine it started as a weekend project and turned into a "while I have
the dash apart I may as well fix this and this....."
 One thing I noticed was about 10 feet of extra speaker wire that was
under the passenger seat and driver seat. They must have had a bulk
discount when assembling the car. Anyone else see this?


Patrick
1040




________________________________________________________________________
________________________________________________________________________

Message: 11
   Date: Mon, 31 Mar 2003 15:06:40 -0000
   From: "Darin Wolf" <son_darin@xxxxxxxxxxx>
Subject: DeLorean Floatation Device

So far I may have the topic set in an akward idea.  However, What I
am about to suggest is in idle curiosity.  I've heard rumor about
how a DeLorean has a hard time of steering at a high rate of speed
and I am curious.  Noting the location of the engine, wouldn't
common sense say that a suggested fix would be to tack on at least
100 lbs to each side of the forward section of the frame in order to
balance out the weight?  The only drawback is that for every ten
lbs. added, one mph is lost.  It may be the 100 lbs. ratio however.

Also, I have read another topic covering how DeLoreans seem to have
floated.  Personally I don't know about some of you, but that sounds
a lot like most chevy vehicles I've owned.  It is a little known
fact thought that Chevy does float longer than Ford.  I've never
seen a DeLorean float, but I would say that its better to have a car
that floats than one you'll drown in.  The only drawback to floating
would be a raging river that would ultimately destroy the car.

Maybe one of us'll get a crazy idea and make a boat out of one, it
certainly wouldn't be me, I have other plans involving the insane
use of DMC.

Either way, if someone can tell me what the effect to the steering
would be if the car was weighed down into a balance, I would
appreciate the shared knowledge.  My understanding is, that
DeLoreans don't slip in the rear.  Is this true?



Daemon Wolf




________________________________________________________________________
________________________________________________________________________

Message: 12
   Date: Mon, 31 Mar 2003 17:31:35 +0200
   From: "Elvis Nocita" <elvisnocita@xxxxxx>
Subject: AW: Clock and A/C light dimming.


Military time ?

Don't forget, the world isn't the US only !
Europeans always use the 24 hour clocks (at least on digital clocks).
and no, we don't say it's 20 hundret, we say it's 20 o'clock or similar.
I am glad it has the 24 and not only the 12 hour display, that's somehow
like having the metric system.  It's simply said easier.

No you can't hook the A/C-lights on the rheostat because it would burn
in a short time.

Elvis



O.k....since nobody answered my question regarding the wierd military
time on my clock I am assuming that nobody has any idea what the problem
could be.  I'd like to have it work correctly but if there is no way to
fix it other than to replace it, I'd rather not.

Also,  Is there anyway to make the A/C bezel lights dim and brighten
with the rheostat?  This is also a question I have asked before with no
responses.Has anyone tried to do this?  Is it a complicated procedure?

Thanks         Tom      #005732





________________________________________________________________________
________________________________________________________________________

Message: 13
   Date: Mon, 31 Mar 2003 11:10:51 -0600
   From: Warren Turkal <wturkal@xxxxxxx>
Subject: Re: Power Steering

On Monday 31 March 2003 01:29 am, vegascop1 wrote:
> Hi guys,
>
> Here is a question for you all. Has anyone ever attempted to update
> the rack to a power steering? My concerns are the lenght of the
> lines that have to go from the power steering pump(rear) to the
> front. Has anyone seen it done? Not nececcerly in a Delorean, maybe
> in another vehicle? Any info would be greatly appriciated.
>
> Thnx,
> Ski 4649

You should investigate electronic power steering. My new Honda Civic Hybrid
uses electronic power steering.

Warren
--
Treasurer, GOLUM, Inc.
http://www.golum.org




________________________________________________________________________
________________________________________________________________________

Message: 14
   Date: Mon, 31 Mar 2003 18:06:25 +0100
   From: Martin Gutkowski <webmaster@xxxxxxxxxxxxxx>
Subject: Re: Leather Interior

The original finish of the seats was to have the centre section of both
bottom and top halves wrinkled. Mine were re-covered by Interior Trim in
Belfast to the original design, but in full leather. Here's a pic


Martin

Joseph Molino wrote:

>yes I did one seat at a time and I even covered the dash and the passenger
>knee pad.  Even without the wrinkles, you cannot tell I did it.  It is a
>perfect match and I had the reupholstered throw in a half inch think pad on
>the seats so they feel a little softer, it also makes the leather wrinkle
>free and nice like new cars.
>
>I will post pics soon.
>
>Joseph
>





________________________________________________________________________
________________________________________________________________________

Message: 15
   Date: Mon, 31 Mar 2003 18:06:12 +0100
   From: Martin Gutkowski <webmaster@xxxxxxxxxxxxxx>
Subject: Re: Leather Interior

...or you can spent only a few $$s on a small fibreglass repair kit and
back the old panels to stiffen them up. It also helps to deliberately
use a LOT of resin so it can soak into the board too.

Martin
#1458
#4426

John Elgersma wrote:

> Because the T-roof panels is only
>anchored in the center, these panels tend to droop over time. If you
>decide to redo the roof panels, have them cut a new piece of core-
>board for the roof. Not necessary to purchase OEM. The inner core-
>board is nothing special. The old one is traced onto new and voila,
>new flush roof panel. Have fun!!
>

>





________________________________________________________________________
________________________________________________________________________

Message: 16
   Date: Mon, 31 Mar 2003 17:27:32 -0000
   From: "therealdmcvegas" <DMCVegas@xxxxxxxx>
Subject: Re: DeLorean Floatation Device

--- In dmcnews@xxxxxxxxxxxxxxx, "Darin Wolf" <son_darin@xxxx> wrote:
> So far I may have the topic set in an akward idea.  However, What I
> am about to suggest is in idle curiosity.  I've heard rumor about
> how a DeLorean has a hard time of steering at a high rate of speed
> and I am curious.  Noting the location of the engine, wouldn't
> common sense say that a suggested fix would be to tack on at least
> 100 lbs to each side of the forward section of the frame in order
to  balance out the weight?
<SNIP>

Don't know what exactly you mean by having a hard time steering @ a
high rate of speed. I've had my car up to around 124mph, and haven't
noticed anything out of the orinary. The front end will lay down, and
stay quite steady. At slower speeds of arond 70mph, I've had to do
some emergency manuvering a couple of times, and have maintained
control of the car fine (obvious since I'm still here to write this).
The back end *wiggles* quite a bit, but the amount of understeer in
the front is just enough to quickly counter the effects of the rear
sway to counter the rear inertia of the car, and return balance. I
have never lost grip in this kind of a situation, just swayed the
back. Remember, the car may be rear-engined, but the suspension
engineering was completed by Lotus, who are pioneers, and experts on
the subject in their own right. Dropping extra wieght into the car
isn't going to help anything. My suspension is in need of a total
overhaul. Drop some money on rebuilding/upgrading the suspension.
Trying to make a "Stainless Sled" isn't going to cure problems, so
much as it will create new ones. Rear-engine mounting in my car
doesn't cause problems, it simply make it more fun!

-Robert
vin 6585 "X"




________________________________________________________________________
________________________________________________________________________

Message: 17
   Date: Mon, 31 Mar 2003 17:29:20 +0000
   From: mike.griese@xxxxxxxxxxxxxxxx
Subject: Re: DeLorean Floatation Device

Most mass-produced cars built for the street are designed
to understeer.  This is the safest way for cars to handle
for the average driver, because the natural reaction for
the general public is to remove their foot from the
accelerator and grenade the brake pedal whenever their
car starts to get out of shape.  This transfers weight
to the front of the car, cancelling out some of the
understeer.  If the car did not understeer initially, pressing
the brake would cause snap oversteer, which is much more
difficult to control - now you are talking about opposite
steering lock and/or steering with the throttle which is
way beyond the average driver. 

A contributing factor to the DeLorean's high speed understeer
(and it is there) is the front ride height.  The nose up attitude
allows air underneath the car at the front, causing lift, lightening
it even further.

Tacking on extra weight is not the way to go about tuning a suspension. 
In fact, it's about the worst thing to do because now you have that
much more mass you have to turn.  The first step for tuning the DeLorean
is to get the nose down to reduce front end lift.  This will also
have a minor effect on the weight distribution of the car.
Understeer can be reduced further by running wider tires than
stock on the front of the car.  You can start playing around with
the alignment specifications, but this will require adjustable
links up front, a feature that DeLoreans don't have without
replacing parts.  There are several good books on suspension design
and tuning.  You can find them at most libraries, Amazon, and some
of the bigger Borders or Barnes & Noble book sellers.  

And I really doubt anyone has done any quantitative testing
regarding the bouyancy characteristics of the average motor
vehicle.  It's hard enough to get automakers to do crash testing.

--
Mike
> So far I may have the topic set in an akward idea.  However, What I
> am about to suggest is in idle curiosity.  I've heard rumor about
> how a DeLorean has a hard time of steering at a high rate of speed
> and I am curious.
> Daemon Wolf
>



________________________________________________________________________
________________________________________________________________________

Message: 18
   Date: Mon, 31 Mar 2003 09:43:56 -0800 (PST)
   From: jaimie Mackenzie <jmacberg@xxxxxxxxx>
Subject: Re: Power Steering

Hi there is no power steering pump in the delorean
unless it has been installed aftermarket which the
delorean dealerships in CA do do when they sell
refurbished cars check to see if there are leaks of
fluid/graese coming from the rubber by the rack under
the front of the car or cracked or broken rubber also
gointo the front area of the front hood next to the
spare tire there are 16 small screws unsrew them take
off plate nd grease steering rod where it enters the
rack real easy also check to see if there is loss of
the fluid/ grease if there is there is a pricedure to
put more fluid in rack if no leaks anyhwere then ok
thanks Jaimie


--- vegascop1 <vegascop1@xxxxxxxx> wrote:
> Hi guys,
> Here is a question for you all. Has anyone ever
> attempted to update the rack to a power steering?



________________________________________________________________________
________________________________________________________________________

Message: 19
   Date: Mon, 31 Mar 2003 17:59:54 -0000
   From: "miltdanfoss" <dan.foss@xxxxxxxxx>
Subject: Cylinder Liner Seat Corrosion

Bought my first DeLorean a few weeks ago after looking in earnest for
about a month. Drove the 4 hours to Miami area and picked it up
myself.

I bought a project, with an excellent interior/exterior, but with the
engine in pieces. The engine is complete, however it is 100%
disassembled.

I have rebuilt many an engine, but never a V6, and since I've never
even seen a real DeLorean engine all together, it is a very fun, but
challenging jig-saw puzzle.

I dry assembled it last week, to make sure I had enough bolts, etc.
and to learn my lessons the easy way. Thanks to everyone who has
posted engine pictures. Helped me figure a couple things out not
specified in the manuals, i.e., auxillary pulley locations.


Here's my question:
This last weekend, after being shut down because of not getting all
four thrust washers I ordered from DMC, I set about the busy work of
cleaning threads, etc. I noticed there was corrosion around the
number 1 and 4 cylinder liner seats. It has eaten into the flange
seat, and had me ponderring an upper crankcase replacement all
weekend.

Any thoughts on this? I'd love to hear them.

Dan in Cocoa, FL
VIN#  3932


BTW $8300 for car and about $1600 in miscellaneous parts, tools,
machine shop work, etc., so far. I am frothing at the bit to get this
engine complete and in the car!!






________________________________________________________________________
________________________________________________________________________

Message: 20
   Date: Mon, 31 Mar 2003 10:12:46 -0800
   From: Phil Priestley <phil@xxxxxxxxxxxxxxxxxx>
Subject: Wiring gremlins

The horns which are new sound like someone stepping on a duck.  I
cleaned the grounds but i think it goes deeper than that. the drivers
side radiator fan doesn't  work(have the fan fail bypass) and those are
on the same sub-harness. If i disconnect the fans  and jumper the left
fan to the right side it works fine. My test light glowed real dim and
my VOM was at work so I couldn't check voltage but I would say probably
around 6v going to the fan. I cleaned the plugs going to the fans but
that didn't help.  I checked the plug behind the washer bottle and the
contacts were nice and clean.

any Ideas?
I will post this question to the list also and see what people have to
say.


Phil Priestley
Alessandros 120
(503)370-9951




________________________________________________________________________
________________________________________________________________________

Message: 21
   Date: Mon, 31 Mar 2003 14:44:32 -0500
   From: mpaine@xxxxxxxxxxxxxxxx
Subject: Re: Leather Interior

They already spent the time and energy to make the patterns of the parts and I
really liked the look of their work.

Quoting William Bowie <wbowie@xxxxxxxxx>:

> Aren't there plenty of shops in th US that could handle this?  D seats
> aren't anymore difficult to recover than any other car. Why spend so much
> shipping them to the UK?
>
> WB(future D owner in training)
>
> ----- Original Message -----
> From: "Michael Paine" <mpaine@xxxxxxxxxxxxxxxx>
> Sent: Sunday, March 30, 2003 9:43 PM
> Subject: Re: [DML] Leather Interior
>
>
> > I am in the US and would be interested in getting in touch with them to
> > do my seats... wonder what shipping would be for 2 seats to them ??
> >
> > Michael
> >
> > Vin 6067 (in under a week)



________________________________________________________________________
________________________________________________________________________

Message: 22
   Date: Mon, 31 Mar 2003 19:45:19 -0000
   From: "silverdelorean2002" <silvercrw646@xxxxxx>
Subject: Re: Restored Engine Compartment

I am gonna go dig one up. What i started with was embarrising. The
entire compartemnt was brown along with rusty bolts etc.. I wil dig
up a pic and post it. Thanks

Jon

--- In dmcnews@xxxxxxxxxxxxxxx, Dick Ryan <deloreanbiker@xxxx> wrote:
> Stunning!  Can you post a picture of what you started with? 
>
> Dick Ryan
> VIN16867



________________________________________________________________________
________________________________________________________________________

Message: 23
   Date: Mon, 31 Mar 2003 20:01:34 -0000
   From: "David Teitelbaum" <jtrealty@xxxxxxxxxxx>
Subject: Re: DeLorean Floatation Device

You bring up an interesting problem. If the Delorean floats, how to
get out? I suspect it will quickly start to go down rear end first
because of the motor but you can't climb out a window and as soon as
you open a door (assuming you can against the force of the water) it
will go down like a rock! I guess that you could kick out the front
windscreen or push a fire extinguisher through it and climb out that
way tearing yourself up in the process. Adding weight to the front of
the car will make the car harder to steer at normal speeds, increase
the stopping distance, reduce the suspension travel by lowering the
height, wear the front tires faster, and induce oversteer. The car was
not designed for a lot of weight on the front, it is a very balanced
design.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Darin Wolf" <son_darin@xxxx> wrote:
> So far I may have the topic set in an akward idea.  However, What I
> am about to suggest is in idle curiosity.  I've heard rumor





________________________________________________________________________
________________________________________________________________________

Message: 24
   Date: Mon, 31 Mar 2003 21:17:49 -0000
   From: "schab932000" <schab932000@xxxxxxxxx>
Subject: Re: Exhaust stud removal

Thanks for everbody's input. I did find a stud remover off one of
those nap-on type trucks. It ran me about $25.00 but worked
great. Also PB Blaster seamed to help out as well. This is not
any easy job, I wouldn't recommend many people to do this.

One additional question. When putting the new studs in, does
anyone know the toque setting? When putting the studs in, do I
just hand tighten them in, or do a need to double nut to torque
them in?

thanks,

pat vin 5552




________________________________________________________________________
________________________________________________________________________

Message: 25
   Date: Mon, 31 Mar 2003 20:08:42 EST
   From: kayoong@xxxxxxx
Subject: For Sale -- LockZilla Remote

I have for sale, the LockZilla Remote Unit.
If interested, E-mail me private:  kayoong(at)aol.com

Kayo Ong
#5508
Lic 9D NY


[Non-text portions of this message have been removed]




________________________________________________________________________
________________________________________________________________________



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated