[DML] Digest Number 50
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Digest Number 50



Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html

To address comments privately to the moderating team, please address:
moderator@xxxxxxxxxxx
------------------------------------------------------------------------

There are 3 messages in this issue.

Topics in this digest:

      1. Re: Coil
           From: "DMC Joe" <dmcjoe@xxxxxxx>
      2. Re: door hinge raising
           From: "DMC Joe" <dmcjoe@xxxxxxx>
      3. Re: Engine compartment cover paint
           From: "DMC Joe" <dmcjoe@xxxxxxx>


________________________________________________________________________
________________________________________________________________________

Message: 1
   Date: Mon, 15 May 2000 00:14:28 -0400
   From: "DMC Joe" <dmcjoe@xxxxxxx>
Subject: Re: Coil

White/yellow connects to terminal #15.

"We're here to help you"
DMC Joe / De Lorean Services / <dmcjoe@xxxxxxx>
Web Site: <www.deloreanservices.com>
.
  
----- Original Message ----- 
From: Mike Bell <mbell1954@xxxxxxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Saturday, May 13, 2000 9:20 PM
Subject: [DML] Coil


> Can anyone tell me the color of the wire leading to terminal #15 on 
> the coil?  Thanks!




________________________________________________________________________
________________________________________________________________________

Message: 2
   Date: Mon, 15 May 2000 00:48:05 -0400
   From: "DMC Joe" <dmcjoe@xxxxxxx>
Subject: Re: door hinge raising

The front door hinge shims are part #105453, I believe that we, as well as
the other DeLorean part suppliers stock these items.

"We're here to help you"
DMC Joe / De Lorean Services / <dmcjoe@xxxxxxx>
Web Site: <www.deloreanservices.com>
.

----- Original Message -----
From: <Delorean17@xxxxxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Sunday, May 14, 2000 11:50 AM
Subject: [DML] door hinge raising


> Hello,
>     My Jul 81 DeLorean had a large dent in the door so I bought a
perfect
> used one for it that came off off an 82 or 83 De Lorean.  I dont have
the
> T-panel on my car right now because the door is too close to the
fiberglass
> roof.  The top of the new door hits the fiberglass roof panel very hard
and
> makes a nasty noise when the door goes up.  There is no way I can put
the
> T-panel back on because the door would smash it when it went up.
>     I moved the four bolts connecting the doors to the hinges down and
that
> is still not even close to high enough.  The stainless actually bows in
when
> its up so I leave it closed now.  The manual says I am going to have to
add
> shims under the hinge mount.  Looks like the torsion bar has to come out
just
> after I got it in:(  does anyone know what DeLorean supplier has these
shims?
>
>
> Thanks
> Dave
> #2496




________________________________________________________________________
________________________________________________________________________

Message: 3
   Date: Mon, 15 May 2000 00:47:31 -0400
   From: "DMC Joe" <dmcjoe@xxxxxxx>
Subject: Re: Engine compartment cover paint

Dave,

Krylon semi-flat black spray is the only paint that should be used on the
engine cover. Follow the directions carefully for a professional looking
job.
I have seen paint that claims that it looks like stainless steel and it
still looks like silver paint.

"We're here to help you"
DMC Joe / De Lorean Services / <dmcjoe@xxxxxxx>
Web Site: <www.deloreanservices.com>
.

----- Original Message -----
From: <Delorean17@xxxxxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Sunday, May 14, 2000 10:46 AM
Subject: [DML] Engine compartment cover paint


> Hello List,
>     I am finishing up the exterior of my 81 DMC and doing a few last
things
> before it gets painted.  The bottom of my engine compartment cover is
very
> faded and the screen retainer brackets are rusty.  What color do I paint
the
> cover and screen brackets? Is it flat black?  how should I prepare it
before
> I paint it?
>
>     what color are the screens supposed to be?  Myne are painted black
but
I
> am considering painting them a stainless steel color.  I remember seeing
a
> paint color called "stainless steel"  does anyone know who makes it?
>
> Thanks
>
> Dave,
> #2496-can't come to dmc2000:(




________________________________________________________________________
________________________________________________________________________


<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated