Re: [DMCForum] Re: [DML] Re: Torsion bar adjustment

[Ryan Wright <ryanpwright@xxxxxxxxx>]

On 10/14/05, Martin Gutkowski <martin@xxxxxxxxxxxxxx> wrote:
>
> Not the sort of thing I'd expect to find in our equivalent over here,
> but a decent tool shop that does metric stuff should know immediately
> what you mean. If Helicoil doesn't make sense, say "thread insert kit"

OK, I'm off and looking today. Hopefully I can find this local.

> No that makes perfect sense.... strange. I take it you've tried two
> small pry bars, one on each side to pull it off? I've had some stubborn
> ones but they always come off like that. Much easier if you take the
> louvers off, and even better with the roof out the way, though this
> might not be practical!

Louvers are off, and I've tried to pry it out with a pair of
screwdrivers. I think I'll see if I can't find or make some small
pry-bars more suited to the task and try again.

> The Allen key is a 3/8"

Good, so I'm using the right one. :)

Thanks Martin, Greg, & everyone else who has replied!

-Ryan

SPONSORED LINKS

Dmc	Dml	Dmc fz10
Dmc fz1s	Delorean part	Dml forte

---

YAHOO! GROUPS LINKS

•  Visit your group "DMCForum" on the web.
   
•  To unsubscribe from this group, send an email to:
   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---