[DMCForum] Re: de-emissioning (Robert)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: de-emissioning (Robert)



I didn't -- I'm burning a carburetor. Same PRV (minus injector bungs)
otherwise.

I'll put a pic in the photo section. Notice how small and compact my
carb is. Absolutely no problem changing cap/rotor, plugs, and wires
(about a 5-10 minute job). Carb can be left attached to the intake
manifold to access the Valley of Death (a 3 minute job -- did it while
pumping gas at Pigeon Forge). Clutch slave cylinder is totally
exposed, as is the heater core shutoff valve.

Better stop here -- Marc becomes agitated when I tout carburetion as
the cure for whatever ails a PRV...

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, "therealdmcvegas" <dmcvegas@xxxx> wrote:
> --- In DMCForum@xxxxxxxxxxxxxxx, "content22207" <brobertson@xxxx> wrote:
> <SNIP>
> > The engine compartment looks much less cluttered now. I really don't
> > like to see a thousand wires & hoses when I pop a hood. I definitely
> > don't like to work around them. Simplicity used to be a virtue...
> >
> > Bill Robertson
> > #5939
>
> Then however did you get used to K-Jetronic on your DeLorean? :p
>
> -Robert




SPONSORED LINKS
De lorean Delorean part Delorean cadillac


YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated