Re: [DMCForum] Repair holes in cooling pipe?

[Chris Almy <chris.almy@xxxxxxxxxxx>]

If you are looking for cheaper replacements, DPNW sells most of them used. 
I don't know what shape they are in, but I'm sure Toby will let you know if 
you ask. Their web site is here:
http://www.delorean-parts.com/

Even the NOS stock they have is about 10% less then most other vendors 
(assuming they have it).

Chris
VIN 4099

At 12:15 AM 6/11/2005 +0000, you wrote:
>I pulled out some of the radiator coolant piping today.  I removed all
>of the aluminum tubing from the water pump to about where the fuel
>accumulator is.  Some of the tubing is actually pitted in some areas
>to the point where there's pinholes in it!  These areas were mainly at
>the sections where the rubber joining hose ended.  That is:
>
>==aluminum=====|\\rubber\\|=====aluminum===
>
>Right where the |'s are, is where the pitting was the worst.
>Is there any way to repair this?  I looked and saw the price of those
>tubes is at least $30 each.  Some cost more.
>
>thanks,
>
>Matt
>#1604


[Non-text portions of this message have been removed]

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.