[DMCForum] Re: Does the lock module know anything?

["therealdmcvegas" <dmcvegas@xxxxxxx>]

Spray down the locks, linkage, and everything associated with White 
Lithium grease. I say spray, because you'll want to use the stuff that 
comes in an aersol can. Then clean the contacts on the wiper switch.

After installing the kit on someone else's car, I can tell you that you 
shouldn't have problems of any sort on it. The wiring is uber-
siomplistic, and the system is damn efficient. The door actuators are 
far superior to solenoids.

-Robert



--- In DMCForum@xxxxxxxxxxxxxxx, Andrew <aos+yahoo@xxxx> wrote:
> Actually, I think I see what's going on here.  Looks like the 
driver's 
> side wipe switch isn't reliably moving all the way to make contact in 
the 
> locked position.
> 
> The lock is adjusted well, but is mechanically really difficult to 
move, 
> and neither the solenoid nor the actuator seems to have the muscle to 
move 
> it all the way.
> 
> So I'm off to figure out a mechanical problem instead of an 
electrical 
> one.  :)
> 
> -andrew

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.