[DMCForum] Re: Torx Fasteners (Martin)

["content22207" <brobertson@xxxxxxxxxxxx>]

With all due respects, how much security is required for a window
crank? Or a headlight adjusting screw? Or a side mirror mounted from
INSIDE the door?

I think the idea behind Torx is faster positioning of the driving bit
during assembly line production. No thought whatsoever was given to
later removal.

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx> wrote:
> Torx fastners were not designed to be stronger than allen key cap 
> screws, but were a security measure. There are 12 point "star" bits as 
> well and.... aw fuck it, I can't be arsed.
> 
> Martin
> 
> content22207 wrote:
> 
> >
> > The falacy of multi-splines is frustratingly proven by Torx fasteners.
> > Every auto owner who has had to deal with their stripped heads knows
> > what I mean. We all do the same thing -- replace them with old
> > fashioned allen or hex heads after they are drilled out!
> >
> > And 16 oz hammers are stronger than 24 oz. And 6mm bolts are stronger
> > than 10mm. And #1 phillips screwdrivers are stronger than #3...
> >
> > Bill Robertson
> > #5939

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.