[DMCForum] Re: DeLorean Workshop Manual

["John Dore" <dmcjohn@xxxxxxxxxxx>]

Travis,

Just to clarify, I'm taking my frame out of my car for galvanising 
and powdercoating, and am trying to find the best procedure for doing 
this, or a checklist that I could use... Anyone have Nick's checklist 
as Dave mentioned?

Thanks again,
John

--- In DMCForum@xxxxxxxxxxxxxxx, "John Dore" <dmcjohn@xxxx> wrote:
> 
> Hey Travis,
> 
> I know, I've already replaced mine with the SS line...
> 
> I was just pointing out that in the clutch section of the workshop 
> manual, there is a reference to a procedure for separating the GRP 
> body from the frame, which should be located in the Body section of 
> the workshop manual, but it is not there in my copy! So, I'm 
> wondering is it just I'm missing a few pages, or was it never in 
the 
> workshop manual? Was there ever a procedure drawn up and 
distributed 
> to dealers on the proper method of doing this?
> 
> Thanks,
> John.
> 
> 
> --- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> 
wrote:
> > The clutch line instructions are wrong. That was the way it was 
set 
> up on
> > the prototype. I talked to Rob Grady about this when I changed 
the 
> line out.
> > If you look under the car, the clutch line is strapped to one of 
> the cooling
> > hoses that runs underneath the car.
> > 
> > -----Original Message-----
> > From: Dave Stragand [mailto:dave.stragand@xxxx] 
> > Sent: Friday, January 28, 2005 8:50 AM
> > To: DMCForum@xxxxxxxxxxxxxxx
> > Subject: RE: [DMCForum] DeLorean Workshop Manual
> > 
> > 
> > Nick Pitello wrote up a great checklist on this... does anyone 
> still have
> > it?
> >  
> > -Dave
> > 
> > -----Original Message-----
> > From: John Dore [mailto:dmcjohn@xxxx] 
> > Sent: Friday, January 28, 2005 7:31 AM
> > To: DMCForum@xxxxxxxxxxxxxxx
> > Subject: [DMCForum] DeLorean Workshop Manual
> > 
> > 
> > 
> > Hi Guys,
> > 
> > Need a bit of help - just bought the DeLorean workshop manual, 
and 
> in 
> > the body section, there are no instructions on how to separate 
the 
> > body from the frame. 
> > 
> > However, in the clutch hydraulics section it mentions that if you 
> > need to replace the clutch line you need to separate the body and 
> > frame (which is obviously a load of crap), and to see the "body" 
> > section of the manual for the correct procedure on doing this.
> > 
> > So, whats the story? Is it just my copy is missing a few pages, 
or 
> > was there ever an official procedure drawn up for separating the 
> body 
> > and frame?
> > 
> > Thanks for any help!
> > 
> > John
> > 
> > 
> > 
> > 
> > 
> > Yahoo! Groups Sponsor      
> > 
> > ADVERTISEMENT
> > 
> > 
> >  
> > 
> 
<http://us.ard.yahoo.com/SIG=129r1giis/M=298184.5639630.6699735.300117
> 6/D=gr
> > 
> 
oups/S=1705126215:HM/EXP=1107001873/A=2532114/R=2/SIG=12km2keat/*http:
> //clk.
> > 
> 
atdmt.com/NFX/go/yhxxxnfx0020000014nfx/direct/01/&time=110691547398608
> 8> 
> >  
> > <http://us.adserver.yahoo.com/l?
> M=298184.5639630.6699735.3001176/D=groups/S=
> > :HM/A=2532114/rand=674007980>       
> > 
> > 
> >   _____  
> > 
> > Yahoo! Groups Links
> > 
> > 
> > *      To visit your group on the web, go to:
> > http://groups.yahoo.com/group/DMCForum/
> >   
> > 
> > *      To unsubscribe from this group, send an email to:
> > DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> > <mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe> 
> >   
> > 
> > *      Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
> Service
> > <http://docs.yahoo.com/info/terms/> . 
> > 
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]
> > 
> > 
> > 
> > 
> >  
> > Yahoo! Groups Links

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.