[DMCForum] Re: roof section...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DMCForum] Re: roof section...
- From: "Joe OBrien" <joeyoseppijoe@xxxxxxxxx>
- Date: Fri, 27 Aug 2004 20:22:32 -0000
Greg, you'll be better off just e-mailing them and asking. Some of
the obscure parts can be hunted for hours on the DMCH site.
Sometimes, things that are in the supposed category are just
impossible to find. The old Delorean dealer in Bellevue here lets me
just walk into his shop and browse through all his old DMC stock. It
is all still in bags & brand new, and he gives it to me at a good
discount. He references the price of DMCH's website. On a day I was
just buying a few incidental items to hoard for later on, and when
we went to look them up, we never could find any of them.
Examples of oddball parts are the drain grommet next to the fuel
filler, the caps that go over the sideposts on the doors. They are
imposible to locate. I gave up and just mailed james directly and he
knew the numbers right away. Don't feel bad at being lost on the
site, I do it all the time.
Joe
--- In DMCForum@xxxxxxxxxxxxxxx, "timnagin" <timnagin@xxxx> wrote:
> I didn't see anything listed about this part in the fiberglass
underbody
> section of DMCH, but will hopefully find out more tomorrow when I
call them.
>
> It's not hard to get off the car, once you have removed the doors,
as it
> basically just unbolts. Removing the huge amounts of sealant is a
> completely different matter. It is a very basic stamped piece
that could
> probably be reproduced with a metal brake and a little cutting
time.
>
> Greg
>
>
>
> -----Original Message-----
> From: Walter Coe [mailto:Whalt@xxxx]
> Sent: Thursday, August 26, 2004 11:08 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: Re: [DMCForum] roof section...
>
>
>
> Greg,
>
> If there is no part number then it must be considered part
> of the fiberglass underbody.
>
> I have always wanted to replace mine with a stainless steel
> reproduction. Does it look like it would be hard to do? If
> anyone wants to loan me one, I'll run it by a SS fabricator
> I know.
>
> Walt Tampa, Florida
Yahoo! Groups Sponsor |
ADVERTISEMENT
| |
|
Yahoo! Groups Links
Back to the Home of PROJECT VIXEN