[DMCForum] Re: Spare no expense- Flux Capacitor (Are you listening Travi
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Spare no expense- Flux Capacitor (Are you listening Travis?)



The instructions have you pull both sets of red/pink and red/slate
male pins from the harness. Toby's females on his relay setup aren't
deep enough to take them. I would re-terminate his vs. cutting up the
original harness.

Rich

--- In DMCForum@xxxxxxxxxxxxxxx, "Joe OBrien" <joeyoseppijoe@xxxx>
wrote:
> I'm about to get a set of the DPNW actuators, so exactly what part
> was missing that you had to scrounge parts for at Radio Shack? I
> thought it was a straightforward installation with the needed parts
> supplied. Just curious if you could let me know of any "special"
> procedured needed to install them.
>
> Thanks,
>
> Joe O'Brien
>
> 2524 & 16634
>
>
>
>
> --- In DMCForum@xxxxxxxxxxxxxxx, "cruznmd" <racuti1@xxxx> wrote:
>  I installed the DPNW
> > lock actuators today. A superior product, easy install. Just one
> > question: Why did Toby put terminals on the black wires that mate
> with
> > the existing harness, but not on the red/pink & red/slate wires? I
> > gotta run to Radio Shack.


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated