[DMCForum] Re: Lower ball joint replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Lower ball joint replacement



Hm. Ok. This is a little more involved than I thought.

I ask because Dave noticed an odd pattern wear on the driver's front 
tire.

Handling isn't that bad but could be better. The question is what's 
the cause? Worn tie rod ends? Worn steering rack? Worn ball joint?

Occasional symptom is a vibration in the steering wheel, which 
sometimes occurs after a hard braking. I originally thought it was a 
caliper dragging but it has happened once or twice without braking at 
all. The odd thing is, the vibration starts, then it just fades away 
for no apparent reason and all is well.

The odd wear pattern and the vibration seem to be limited to the 
driver's side. Is it permissible to replace only one or do they have 
to be done in pairs?

Rich

--- In DMCForum@xxxxxxxxxxxxxxx, "Dave Stragand" <dave.stragand@xxxx> 
wrote:
> Ball joint press... yeah, that would work as well.  I have one of 
those,
> too, but forgot about it.  Normally, I change the bushings when I 
change
> ball joints, so I just do it on a press.
>  
> A ball joint press kinda looks like a big C-clamp with adapters to 
fit
> around the joint.  On installing the new one, it needs to go in 
very snug.
> If it's loose, Grady's sells a shim pair that will tighten up the 
fit.
>  
> -Dave
> 
> -----Original Message-----
> From: content22207 [mailto:brobertson@xxxx] 
> Sent: Wednesday, November 19, 2003 9:45 AM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] Re: Lower ball joint replacement
> 
> 
> Autozone "rents" (pay a deposit, refunded when tools returned) both
> pickle fork and ball joint press. 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]



Yahoo! Groups Sponsor	 
 
<http://rd.yahoo.com/SIG=12crq74kb/M=259395.3614674.4902533.1261774/D=egro
upweb/S=1705126215:HM/EXP=1069342003/A=1524963/R=0/*http://hits.411web.com
/cgi-bin/autoredir?camp=556&lineid=3614674?=egroupweb&pos=HM> 	 
 
<http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm
ail/S=:HM/A=1524963/rand=388130621> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated