[DMCForum] FelPro valve cover gasket number

["content22207" <brobertson@xxxxxxxxxxxx>]

FelPro number on box is VS26090. Stock item at Autozone. Comes up in
computer under Volvo PRV of some ilk (probably 1985 760). They can
pull it just by box number. 

Think you'll like 'em.

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote:
> My kit was for a Volvo 760 GLE, 1983. Which ones are you looking at?
> 
> > -----Original Message-----
> > From: content22207 [mailto:brobertson@xxxx]
> > Sent: Monday, September 22, 2003 3:30 PM
> > To: DMCForum@xxxxxxxxxxxxxxx
> > Subject: [DMCForum] FelPro valve cover gasket specs
> > 
> > Checked out a set of FelPro #VS26090 at lunch. Indeed metal core with
> > rubber facings. Not thickest in the world -- about .045" -- but
> > imminently better than a piece of paper.
> > 
> > Need metal core because people have tendency to over torque solid
rubber.
> > 
> > I have significant mismatch between timing chain cover and cylinder
> > head so seated gasket in a bed of silicone. If doing same remember you
> > need two torqings: one gentle just to flatten silicone, and one hard
> > after it's set up.
> > 
> > Bill Robertson
> > #5939
> > 
> > 
> > 
> > 
> > To unsubscribe from this group, send an email to:
> > DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> > 
> > 
> > 
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512
6215:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code=
30509&media=atkins> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm
ail/S=:HM/A=1732161/rand=904603707> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>