RE: [DMCForum] Idle adjustment tool question

["Travis Goodwin" <tgoodwin@xxxxxxxxxxxx>]

That's what I meant when I brought it up... mixture adjustment. I got my
terms mixed up.

> -----Original Message-----
> From: Martin Gutkowski [mailto:webmaster@xxxxxxxxxxxxxx]
> Sent: Wednesday, September 17, 2003 2:54 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: Re: [DMCForum] Idle adjustment tool question
> 
> If you go into a model shop that sells japanese RC cars, you can buy
> some really neat (expensive) screwdriver-style allen keys. I bought and
> regularly use a 3mm one for mixture adjustment (NOT idle adjustment!!!)
> It's also really handy for getting the mirror switch out without the
> innards going sproiiiinggg.
> 
> Martin
> 
> Walter Coe wrote:
> 
> >>What size allen wrench is needed to adjust the idle mix screw?
> >>
> >>
> >
> >Like Samuel said, mine is a long T-handle that was part of a set.  They
> are
> >common at Sears, NAPA, Snap-On, etc.  The one you need is a 3mm.  You
> could
> >buy just one, but it is really handy to have the whole set.  I use the
> 5mm
> >to get cold start valves off.
> >
> >Walt
> >
> >
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> To unsubscribe from this group, send an email to:
> DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512
6215:HM/A=1732163/R=0/SIG=11n0nglqg/*http://www.ediets.com/start.cfm?code=
30510&media=zone> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm
ail/S=:HM/A=1732163/rand=780309652> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>