[DMCForum] Re: Idle speed regulator removal

["cruznmd" <racuti1@xxxxxxxxxxxx>]

I pull mine out all the time since I'm fumbling around with my engine. 

You're right. Undo the hose clamps and pull the electrical plug off of
it. 

I wouldn't say there's a "special" consideration regarding dirt. Just
don't get any in there. Tape a sandwhich baggie over the cold start
valve and mixture pipe.

Rich

--- In DMCForum@xxxxxxxxxxxxxxx, jordan rubin <nuttenschleuder@xxxx>
wrote:
> Hello all:
> 
>     
> 
> Quick question:
> 
> When working with the back driver side plugs and fuel
> injectors, it seems almost necessary to get the idle
> speed regulator out of the way.  I imagine it could be
> removed by removing the round clamp, dosconnecting the
> two hoses and the electrical connector.
> 
> am i right here? and is there anyspecial consideration
> about dirt getting in this unit or the cold start
> valve for that matter.
> 
> 
> thanx
> 
> jordan 11613
> 
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3551198.4824677.1261774/D=egroupweb/S=170512
6215:HM/A=1663535/R=0/SIG=11ps6rfef/*http://www.ediets.com/start.cfm?code=
30504&media=atkins> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3551198.4824677.1261774/D=egroupm
ail/S=:HM/A=1663535/rand=699449885> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>