Re: [DMCForum] Re: Back to Basics

["Martin Gutkowski" <webmaster@xxxxxxxxxxxxxx>]

Set the crank mark to 0 because it's at that point the piston is at TDC 
- the mark on the dizzy body corresponds to being at 0 and will give you 
plenty of adjustment either way.

Martin

cruznmd wrote:

>What I mean is, do you set the crank at the "0" mark, or 13 degrees, 
>and then set the rotor to the notch on the dizzy body?
>
>It's the crank setting I'm interested in. Apparently Bill sets his 
>crank mark to 13 degrees.
>
>  
>





Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=244522.3512152.4794593.1261774/D=egroupweb/S=170512
6215:HM/A=1595054/R=0/SIG=124f8kfa7/*http://ashnin.com/clk/muryutaitakenat
togyo?YH=3512152&yhad=1595054> Click Here!	
 
<http://us.adserver.yahoo.com/l?M=244522.3512152.4794593.1261774/D=egroupm
ail/S=:HM/A=1595054/rand=381622197> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>