RE: [DMCForum] Re: Remove fule line pressure

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Bill, Yes, That will work but it would  flood a lot of gas into the
cylinders. The normal way is to relieve the pressure at the cold start
valve.Take it off and push in on the pin. Mabey a tea spoon.
John Hervey

  -----Original Message-----
  From: content22207 [mailto:brobertson@xxxxxxxxxxxx]
  Sent: Saturday, July 19, 2003 1:12 PM
  To: DMCForum@xxxxxxxxxxxxxxx
  Subject: [DMCForum] Re: Remove fule line pressure


  Push down the air sensor plate.

  Bill Robertson
  #5939

  >--- In DMCForum@xxxxxxxxxxxxxxx, jordan rubin <nuttenschleuder@xxxx>
  wrote:
  > Hello all:
  >
  > Forgot to add to the 1st email.  Is there a good
  > method or removing the pressure from the fuel system
  > before removing the fuel regulator, or should i bring
  > a towel.
  >
  > thanx
  >
  > jordan 11613
  >
  > __________________________________
  > Do you Yahoo!?
  > SBC Yahoo! DSL - Now only $29.95 per month!
  > http://sbc.yahoo.com


        Yahoo! Groups Sponsor
              ADVERTISEMENT




  To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx



  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3551198.4824677.1261774/D=egroupweb/S=170512
6215:HM/A=1663535/R=0/SIG=11ps6rfef/*http://www.ediets.com/start.cfm?code=
30504&media=atkins> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3551198.4824677.1261774/D=egroupm
ail/S=:HM/A=1663535/rand=490088914> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>