Travis, The chemical is good and there may be other opinions as to take
out
the manifold bolts, But heat will play a big role in expansion. It took me
almost one hour and a propane torch which is not the hottest but ok to get
a
stud out of a starter. I know heat would make it harder to work on, but it
will expand and loosen up quicker.
John Hervey
-----Original Message-----
From: Travis Goodwin [mailto:tgoodwin@xxxxxxxxxxxx]
Sent: Thursday, June 26, 2003 5:38 AM
To: 'DMCForum@xxxxxxxxxxxxxxx'
Subject: [DMCForum] Torque question
The process for removing the exhaust manifold has begun. Tuesday I began
spraying all the bolts with penetrating oil and will be doing it every
night
until I actually get time to take them off.
My question is this:
What are the torque settings for the exhaust manifold?
Yahoo! Groups Sponsor
To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
<http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512
6215:HM/A=1564415/R=0/SIG=11t6t7kdo/*http://www.netflix.com/Default?mqso=6
0164784&partid=3170658>
<http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm
ail/S=:HM/A=1564415/rand=372192124>
To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN