[DMCForum] Re: DeLorean Workshop Manual

["John Dore" <dmcjohn@xxxxxxxxxxx>]

Hey Travis,

I know, I've already replaced mine with the SS line...

I was just pointing out that in the clutch section of the workshop 
manual, there is a reference to a procedure for separating the GRP 
body from the frame, which should be located in the Body section of 
the workshop manual, but it is not there in my copy! So, I'm 
wondering is it just I'm missing a few pages, or was it never in the 
workshop manual? Was there ever a procedure drawn up and distributed 
to dealers on the proper method of doing this?

Thanks,
John.


--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote:
> The clutch line instructions are wrong. That was the way it was set 
up on
> the prototype. I talked to Rob Grady about this when I changed the 
line out.
> If you look under the car, the clutch line is strapped to one of 
the cooling
> hoses that runs underneath the car.
> 
> -----Original Message-----
> From: Dave Stragand [mailto:dave.stragand@xxxx] 
> Sent: Friday, January 28, 2005 8:50 AM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: RE: [DMCForum] DeLorean Workshop Manual
> 
> 
> Nick Pitello wrote up a great checklist on this... does anyone 
still have
> it?
>  
> -Dave
> 
> -----Original Message-----
> From: John Dore [mailto:dmcjohn@xxxx] 
> Sent: Friday, January 28, 2005 7:31 AM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] DeLorean Workshop Manual
> 
> 
> 
> Hi Guys,
> 
> Need a bit of help - just bought the DeLorean workshop manual, and 
in 
> the body section, there are no instructions on how to separate the 
> body from the frame. 
> 
> However, in the clutch hydraulics section it mentions that if you 
> need to replace the clutch line you need to separate the body and 
> frame (which is obviously a load of crap), and to see the "body" 
> section of the manual for the correct procedure on doing this.
> 
> So, whats the story? Is it just my copy is missing a few pages, or 
> was there ever an official procedure drawn up for separating the 
body 
> and frame?
> 
> Thanks for any help!
> 
> John
> 
> 
> 
> 
> 
> Yahoo! Groups Sponsor      
> 
> ADVERTISEMENT
> 
> 
>  
> 
<http://us.ard.yahoo.com/SIG=129r1giis/M=298184.5639630.6699735.300117
6/D=gr
> 
oups/S=1705126215:HM/EXP=1107001873/A=2532114/R=2/SIG=12km2keat/*http:
//clk.
> 
atdmt.com/NFX/go/yhxxxnfx0020000014nfx/direct/01/&time=110691547398608
8> 
>  
> <http://us.adserver.yahoo.com/l?
M=298184.5639630.6699735.3001176/D=groups/S=
> :HM/A=2532114/rand=674007980>       
> 
> 
>   _____  
> 
> Yahoo! Groups Links
> 
> 
> *      To visit your group on the web, go to:
> http://groups.yahoo.com/group/DMCForum/
>   
> 
> *      To unsubscribe from this group, send an email to:
> DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> <mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe> 
>   
> 
> *      Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service
> <http://docs.yahoo.com/info/terms/> . 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> 
>  
> Yahoo! Groups Links

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.