[DMCForum] Re: John Hervey's "Eye Brow Bars"

["Joe OBrien" <joeyoseppijoe@xxxxxxxxx>]

A bit pricey, but they are a much heavier grade steel, and they are 
precut to length, painted, and have the excess sharp edges trimmed 
off. I have performed several eyebrow jobs, and Hervey's bars have 
been the best available. You could hit a wall head on and your 
eyebrows would still be straight, and fit nice & tight when 
installed properly. 

Of course if you want to do it yourself, trim, cut, & prep you 
obviously could do it cheaper, just I didn't have the time and these 
work great for anyone interested.


Joe

2524 & 16634





--- In DMCForum@xxxxxxxxxxxxxxx, "content22207" <brobertson@xxxx> 
wrote:
> Bless his heart, John sometimes charges a little too much for a 
little
> too little:
> 
> Here's a $5.00 bar:
> http://www.mcmaster.com/asp/DisplCtlgPage.asp?
reqtyp=catalog&CtlgPgNbr=3368
> 
> And instructions to install it:
> http://www.dmcnews.com/Techsection/fascia.htm
> 
> My (overpriced) Hervey fuel baffle committed suicide. It's an
> excellent concept, however. I made a new one from a large size
> aluminum tuna fish can ($1.69). About 1,000 times sturdier.
> 
> Bill Robertson
> #5939
> 
> >--- In DMCForum@xxxxxxxxxxxxxxx, DMCVIN6683 <dmcvin6683@xxxx> 
wrote:
> > http://www.specialtauto.com/delorean-parts/frame-body.html
> > 
> > Look in the middle of the page $22.50 for the kit.
> > 
> > Mark V
> > 
> > 
> > 
> > 
> > On Friday, July 16, 2004, at 10:02  PM, Lauren wrote:
> > 
> > >
> > > And now for something completely different.......
> > >
> > > Here's a Delorean related question from me.  I was telling a 
local
> > > Delorean owner that I read about some sort of kit to repair
> > > eyebrows.  Since my eyebrows are the least of my concerns about
> > > my car, I didn't make note of the information.  Can anyone 
point me
> > > in the right direction?
> > > Thanks.
> > >
> > > .............LP
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.